Geonav 7C Manuel D'emploi Et D'installation page 33

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Goto Port
GOTO PORT
Press the GOTO key and select
PORT by the joystick. Choose the
desired port (the latest 8 ports
used will be highlighted) from
the catalog displayed, then press
ENTER to confirm.
To scroll the list of ports quickly,
press the -ZOOM+ key.
It is also possible to type the first
letters of the port name by using
the keyboard located in the lower
part of the screen. Use the joy-
stick to move the cursor down to
the last item of the list, then move
the cursor down again to gain
access to the keyboard.
Use the cursor to select the characters, then confirm with
ENTER. Once the port of interest is shown in the list above,
use the joystick to highlight it and press ENTER to confirm.
Once the desired port has been selected, the GEONAV will
insert a waypoint in the port position and append the new leg
to the existing route (if no route is available, the new waypoint
will be connected to the boat's position).
Press the EXIT key to go back to Navigation mode and enable
automatically the Autozoom function.
English
Goto Nearest
62
GOTO NEAREST
NOTE: This option is available only with the NAVIONICS cartridges containing the
Port Services features. It allows finding and heading for the nearest port featuring the
service desired.
Press the GOTO key, select NEAR-
EST by the joystick, choose the
desired service and press ENTER
to confirm, or EXIT to cancel the
operation.
The GEONAV will show the
three destinations closest to the
boat's position (if in Navigation
mode), or to the cursor's position
(if in Cursor mode), and position
automatically on the closest des-
tination (flashing).
Select one port at a time by us-
ing the joystick; a window will
show the distance and time to
arrive (estimated on the boat's
current speed). Press ENTER to
confirm the selection.
The GEONAV will insert a waypoint in the port selected, de-
lete automatically the existing route (if in Navigation mode), or
append the waypoint to the existing route (if in Cursor mode),
then go back to Navigation mode and enable automatically the
Autozoom function.
Tide or current forecast at the nearest survey station
NOTE: This function is available only with the NAVIONICS cartridges containing
Tides and Currents data.
This function allows displaying, within the space of twenty-
63
English

Publicité

Chapitres

Table des Matières
loading

Table des Matières