Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Track

TRACK
The Track function allows recording the track actually fol-
lowed by the boat. The Track function can be enabled and
disabled several times during navigation; in this case, sepa-
rate track segments will be drawn.
Starting a track
To enable the Track function,
press the GOTO key to display the
main menu, select TRACK,
START and press ENTER to con-
firm. A small circle on the boat's
position will indicate the track
starting point.
Stopping a track
To disable the Track function,
press the GOTO key to display the
main menu, select TRACK,
STOP and press ENTER to con-
firm.
Storing a track in the CompactFlash™
Press the GOTO key to display the main menu, select TRACK,
STORE and press ENTER to confirm. To change the default file
name, use the joystick. To confirm the operation, press ENTER.
The "TRACK STORED" message will confirm that the track
has been stored correctly. Once stored, the track will disap-
pear from the screen.
Each time a track is stored in the CompactFlash™, the plotter's
memory is cleared and the indicator of memory used in the
TRACK menu is reset to 0%.
English
56
Recalling a track from the CompactFlash™
Press the GOTO key to display the main menu, select TRACK
and then RECALL to open the track catalog.
Select the track desired, then press ENTER to confirm the op-
eration or EXIT to exit.
Deleting a track
Press the GOTO key to display the main menu, select TRACK,
DELETE and press ENTER to confirm.
The catalog that lists the tracks stored in the CompactFlash™
will show the CURRENT item indicating the track currently
displayed.
Select the track to delete by the joystick, then press ENTER to
confirm. By selecting CURRENT, the track currently displayed
will be deleted.
Setting the track color
The track color can be selected from the menu; press the GOTO
key to display the main menu, select TRACK, COLORS, choose
a color by the joystick and confirm the selection by pressing
ENTER. The selected color will be stored together with the track.
NOTE: The track color cannot be changed while the recording is active.
Displaying and changing track segment data
Position the manual cursor on a point in the track segment.
A window will show the navigation data recorded in that po-
sition.
Recording date
Recording time
Sea depth
Water temperature
True wind direction
57
English

Publicité

Chapitres

Table des Matières
loading

Table des Matières