Markers - Geonav 7C Manuel D'emploi Et D'installation

Track
•
True wind speed
Wind and depth values are displayed only if available.
By positioning the manual cursor on the starting point of a
track segment, a menu will allow changing the segment name,
displaying average/maximum speed data, trip length/time, de-
leting the single segment as well as changing the single seg-
ment color.
When the menu pops up, press ENTER to access the options,
then use the joystick to select the desired option and press
ENTER to confirm.
Route to a track segment
Press the GOTO key and select TRACK by the joystick. A win-
dow will show, for each track segment, the line color, the
name, the recording start date and time as well as the record-
ing duration and length.
The list can be sorted by using
the joystick to select the sort
field and to confirm. Use the
joystick to select the target seg-
ment (the latest 8 segments used
will be highlighted) from the
catalog and then press ENTER to
confirm.
The GEONAV will position the
manual cursor at the beginning
of the track segment selected;
insert a waypoint by pressing
ENTER, or a marker by holding
ENTER pressed.
English

Markers

58
MARKERS
Markers are used to identify points of interest to which names
and symbols can be assigned.
When a marker is entered, the plotter records also date, time
and sea depth and temperature (if available). This data is stored
together with the marker name, symbol and color and can be
displayed in the window shown by the GOTO MRK menu.
NOTE: Marker names are displayed starting from the 32 NM chart scale.
CURSOR MODE
Inserting a marker
Move the cursor to the position
desired and hold the ENTER key
pressed. A window will display
the symbol and a name automati-
cally assigned to the marker.
Use the joystick and the -ZOOM+
key to change the marker symbol (8 symbols available), name
(max. 8 characters) and color according to the type of marker
to store (e.g., fishing spots, wrecks, rocks, etc.). Press ENTER
to confirm the insertion.
NOTE: The cursor can be moved to the desired position also by using the GOTO
functions.
Changing a marker name/symbol/color
Position the cursor on the marker desired and press ENTER; a
window will display the symbol, the name and the color pre-
viously assigned to the marker selected. Use the joystick and
the -ZOOM+ key to change the marker name, symbol and color.
Press ENTER to confirm the operation.
59
English