Geonav 7C Manuel D'emploi Et D'installation page 32

Markers
Deleting a marker
Position the cursor on the marker to delete and press CLR.
NAVIGATION MODE
Inserting a marker
Hold the ENTER key pressed to insert a marker at the boat's
position. A window will display the symbol and the name
automatically assigned to the marker; to change the marker
symbol, name and color according to the type of marker to
store (e.g., fishing spots, submerged wrecks, rocks, etc.), use
the joystick and the -ZOOM+ key. Press ENTER to confirm the
insertion.
Route to a marker
Press the GOTO key and select
MARKER by the joystick. The
catalog displayed will list, with
respect to each marker, the sym-
bol, the name, the insertion date/
time, as well as, if available, the
sea depth and temperature val-
ues as detected when entered.
Moreover, the catalog shows the
number of markers entered in
the current page and the num-
ber of markers still available.
The list can be sorted by using
the joystick to select the sort
field and ENTER to confirm.
By using the joystick, choose the desired marker (the latest 8
markers used will be highlighted) from the catalog displayed,
then press ENTER to confirm.
Once the desired marker has been selected, the GEONAV will
insert a waypoint at the marker position and append the new
leg to the existing route (if no route is available, the new
English
60
waypoint will be connected to the boat's position).
Press the EXIT key to go back to Navigation mode and enable
automatically the Autozoom function.
NOTE: To delete a single marker, select it from the GOTO Marker list and press the
CLR key.
FUNCTIONS IN THE MARKER MENU
Storing a set of markers in the CompactFlash™
Press the GOTO key to display the menu, select MARKER, then
STORE and press ENTER. Use the joystick to change the de-
fault name and press ENTER to confirm the operation.
The "MRK. STORED" message will confirm that markers have
been stored correctly. Once stored, markers will disappear
from the screen.
Each time a set of markers is stored in the CompactFlash™,
the plotter memory is cleared and the indicator of the markers
available is reset to the maximum value.
Recalling a set of markers from the CompactFlash™
Press the GOTO key to display the menu, select MARKER and
then RECALL to open the marker catalog.
Select the marker set desired by using the joystick, then press
ENTER to confirm the operation, or EXIT to exit.
Deleting a set of markers
Press the GOTO key to display the menu, select MARKER, DE-
LETE and press ENTER to confirm.
The catalog that lists the sets of markers stored in the
CompactFlash™ will show the CURRENT item indicating the
set currently displayed.
Use the joystick to select the set of markers to delete and
press ENTER to confirm. When selecting CURRENT, the set of
markers currently displayed will be deleted.
61
English