Quick Tour - Geonav 7C Manuel D'emploi Et D'installation

Functional Characteristics
Color
Besides displaying color nautical charts, the GEONAV allows
selecting the track and marker colors.
Press the GOTO key to access the menu, select TRACK or
MARKER, then COLORS and confirm by pressing ENTER; choose
the color desired and confirm the selection.
The color of markers can also be selected when entered or
edited, whereas the track segment color can be selected by
positioning the manual cursor on the segment itself.
The color of chart items can be chosen from DAY, NIGHT or
BRIGHT. Press GOTO to display the menu, select SETUP, DIS-
PLAY MODE and then DAY, NIGHT or BRIGHT.
English

Quick Tour

34
QUICK TOUR
We recommend that you use the GEONAV intuitively, since
no damage will be caused by pressing an incorrect button.
Make sure that the GPS receiver
is connected, insert a Compact
Flash™ cartridge and press the
PWR key. At start-up, the last
chart used will be loaded by de-
fault. If the chart is not found,
the list of NAVIONICS charts
stored into the Compact Flash™
cartridge will be displayed. Se-
lect the desired chart by the joy-
stick, then confirm by pressing
ENTER.
A message will warn the user that electronic nautical charts
do not replace official government charts.
Press the PWR key to turn the display backlight on and adjust
the brightness by the joystick; press ENTER to continue (en-
abling the Geonav mode).
The Satellite window will show the configuration of the sat-
ellites in use. As soon as the GPS receiver has obtained a
valid fix (it can take a few minutes), the boat's position and
the relevant area will be displayed at the best scale available.
The default language is English. To change the language, press
GOTO to display the menu, then select SETUP, LANGUAGE
and the desired language by the joystick.
The line, or vector, starting from the boat indicates the boat's
direction, to be ignored if the boat is stationary.
Windows will display the boat's speed, route, chart scale and
local time.
35
English