Geonav 7C Manuel D'emploi Et D'installation page 29

Route
The time to arrive to the waypoint and fuel consumption are
displayed provided that estimated speed and fuel consump-
tion values have been entered (see the Entering speed and fuel
consumption data Section).
To move within the page and scroll the adjacent pages, use
the joystick. To go back to the menu, use the joystick; to exit,
press the EXIT key.
Entering speed and fuel consumption data
The data are used to calculate the values displayed in the
ROUTE window.
Press the GOTO key to display the menu, select ROUTE/SPEED/
CONS. and press ENTER. Use the joystick to enter the data
required and to confirm the operation.
Storing a route in the CompactFlash™
Press the GOTO key to display the menu, select ROUTE, STORE
and press ENTER. To change the default name, use the joy-
stick. To confirm the operation, press ENTER.
The "ROUTE STORED" message will confirm that the route
has been stored correctly. Once stored, the route will disap-
pear from the screen.
Recalling a route from the CompactFlash™
Press the GOTO key to display the menu, select ROUTE, RE-
CALL and press ENTER to open the route catalog; select the
route by the joystick and then press ENTER to confirm, or EXIT to
exit.
The route recalled will be displayed, the Autozoom function
automatically enabled and a window will allow selecting the
target waypoint.
Deleting a route
Press the GOTO key to display the menu, select ROUTE, DE-
English
54
LETE and press ENTER to confirm.
The catalog that lists the routes
stored in the CompactFlash™
will show the CURRENT item in-
dicating the route currently dis-
played.
Select the route to delete by the
joystick, then press ENTER to con-
firm. By selecting CURRENT, the
route currently displayed will be
deleted; the route can also be de-
leted by keeping the CLR key
pressed for 3 seconds in Navi-
gation mode.
Reversing a route
Press the GOTO key to display the menu, select ROUTE and
then REVERSE (if no route is currently displayed, the "NO
ROUTE PRESENT" message will appear).
The waypoint order will be automatically reversed allowing
navigation in the opposite direction.
Route to a waypoint
Press the GOTO key, select ROUTE and move the cursor within
the waypoint list by using the joystick. Press ENTER and select
the target waypoint by the joystick. Press ENTER to confirm the
selection, or EXIT to exit.
As the GEONAV will plot a new route, the waypoint selected
will become the first waypoint in the route, whereas previous
waypoints will be deleted.
55
English