Runway Window; Main Menu - Geonav 7C Manuel D'emploi Et D'installation

Runway Window

RUNWAY WINDOW
This window displays the following information on the target
waypoint:
• Name of the target waypoint
• Distance from the target
waypoint
• Estimated time of arrival to
the target waypoint
• Bearing
• Course
• Steering angle
• XTD (right/left distance from
the planned route)
• XTD limit (runway width)
The graph shows the boat's position with respect to the route.
When the XTD reaches the extreme value shown in the lower
right-hand corner of the window, the boat symbol will reach
the runway right or left side.
To change the XTD limit, see the Setup Section.
NOTE: This window is available in Navigation mode only.
English

Main Menu

50
MAIN MENU
The main menu bar, that appears when pressing the GOTO
key, allows accessing the following options:
ROUTE: To display route information, reverse and delete the
route, set the consumption data and save or read data from the
cartridge.
TRACK: To enable/disable the track function, delete a track,
choose the track color, show the used percentage of track
memory and save or read data from the cartridge.
MARKER: To delete markers, choose the marker color, show
the number of markers used and available, and save or read
marker data from the cartridge.
GOTO PORT: To plan a route to a selected port.
GOTO NEAREST: To plan a route to the nearest port service.
SETUP: To enable/disable and change the plotter's setup.
GOTO LAT/LON: To plan a route to a known geographical posi-
tion.
GOTO RANGE/BEARING: To plan a route to a position whose range
and bearing values are known.
NOTE: The majority of menu items, once selected, show a series of submenus. Use
the joystick to move from one menu to another and press ENTER to choose one item.
51
English