Navigation Windows - Geonav 7C Manuel D'emploi Et D'installation

Operating Modes
NAVIGATION MODE
By pressing the EXIT key repeatedly, it will be possible to ac-
cess the several windows available, provided that they have
been previously enabled by the appropriate option of the Setup
menu.
When the fix is valid and no route is present, the window
sequence is the following:
NAVIGATION > DEPTH SOUNDER > TRIP > SATELLITE > GENERAL
INFO > TIDE INFO > RUNWAY
When a route is present, the window sequence changes as
follows:
SAILING > NAVIGATION > DEPTH SOUNDER > TRIP > SATELLITE >
GENERAL INFO > TIDE INFO > RUNWAY
The Depth Sounder window is displayed provided that data is
received from a depth sounder.
If data is received from the wind instrument, an arrow on the
ship's position will indicate the true wind direction and, if a
route is present, the Sailing windows will be displayed.
The Tide Info window is displayed provided that a NAVIONICS
cartridge featuring Tides and Currents data is active (see the
Tide Info Window Section).
CHART ONLY MODE
To hide the Navigation windows and display a full screen
chart, press GOTO and EXIT at the same time.
Press any key to show the windows again.
English

Navigation Windows

40
NAVIGATION WINDOWS
These windows are automatically
enabled as soon as the GPS re-
ceiver has obtained a valid fix
(FIX OK).
If no route has been entered, the
following data will be shown:
•
Boat's speed
•
Chart scale
•
Course
•
Sea depth (if available)
•
Water temperature (if avail-
able)
•
Local time
To change the chart scale, press the -ZOOM+ key.
If a route has been entered, the
Navigation window will show
the following data:
•
Boat's speed
•
Chart scale
•
Target waypoint
•
Distance
waypoint
•
Time to arrive to the target
waypoint
•
Estimated time to the route
end
to the target
41
English