IKRA PCS 2525 Manuel D'utilisation page 90

2. Fuel filter
1. Using a wire hook, take out the fuel filter from the
feeding port.
2. Wash the filter with gasoline. Replace with new one
if clogged with dirt completely.
WARNING
When returning the filter, use a pinch not to be folded
the suction pipe.
3. Oil tank
1. With a wire hook, take out the oil filter from the
feeding port.
2. Wash the filter with gasoline.
WARNING
When returning the filter, use a pinch not to be folded
the suction pipe.
4. Spark plug
Clean the electrodes with a wire brush and reset the gap
to 0.6 mm as necessary.
WARNING
After spark plug maintenance, reinstall the plug and plug
cap firmly. (TORQUE: 14.7~17.6 Nm/150~180 kg-cm) Or
it may cause the fire accident.
GB | Operating Instructions
Spark plug type:
LD L8RTF
14
(1) Plug
(2) Plug cap
5. Sprocket
Check for extensive wear, and replace it when the teeth
are worn over 1.0mm.
Way of the cooling air
WARNING
The engine metal parts can burn your skin. Never touch
the cylinder, muffler or ignition plug etc. during operation
or right after stopping the engine.
Before starting the engine, check around the muffler and
take off sawdust. If you do not, it will cause the overhe-
ating and a fire. For preventing the trouble, please keep
clean around the muffler.
This engine is air-cooled. Dust clogging between the
inlet port of the cooling air and cylinder fins will cause
overheating of the engine. Periodically check and clean
the cylinder fins after removing the air cleaner and the
cylinder cover.
(1) Inlet port of the cooling air