Sony VPL-GH10 Mode D'emploi page 50

Panel Alignment
50
GB
This feature allows you to adjust the gaps in the color of
characters or the picture.
When set to "On," "Adjust Color" and "Pattern Color" can be
assigned and adjusted.
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color.
Select "R" (Red) or "B" (Blue) to make adjustments based on
"G" (Green).
Pattern Color: Select "R/G" (Red and Green) or "R/G/B" (White,
all colors) when the "Adjust Color" is "R" (Red). Select "B/G"
(Blue and Green) or "R/G/B" (White, all colors) when the "Adjust
Color" is "B" (Blue).
Adjust: The shift adjustment and zone adjustment of the color
selected in "Adjust Color" can be made with < / ,, M / m
buttons.
When "Shift" is selected: Assign the settings of the horizontal
direction (H) with < / , buttons and the vertical direction (V)
with M / m buttons on the shift adjustment screen.
When "Zone" is selected: Select the position to adjust with
< / , buttons for the horizontal position (H position) and M / m
buttons for the vertical position (V position), then press
Set the amount to adjust with < / , buttons for the horizontal
direction (H direction) and with M / m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing .
Reset: Returns to the factory settings.
Note
Depending on the adjustments made above, colors may become
uneven or the resolution may change.
.