Safety Instructions For Maintenance; Possible Malfunctions - Bartscher AT90 Mode D'emploi

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Problem
Device connected to
the power supply, but
the green operation
control lamp is not lit.
Device connected to
the power supply, but
does not heat up.
Device is connected to
power supply, but
does not work.
Cooking/roasting
result is uneven.
Cause
• Mains plug not inserted
properly.
• Main/time control knob
not set.
• Temperature not set.
• Heating element is
defective.
• Overheating protection
device has tripped.
• Fan is defective.
• Temperature control
knob is defective.
• Distance between food
and baking tray above
the food is too low.
Remedy
• Disconnect mains plug and
insert it properly.
• Set the main/time control
knob.
• Temperature not set.
• Heating element is defective.
• Let the device cool down.
Press the RESET button at
the rear. When overheating
protection device trips, contact
service or notify your dealer.
• Contact a dealer
• Contact a dealer
• Keep the minimum distance
of 40 mm.
- 35 -