Attaching The Fenders - Babboe Curve Instructions De Montage

Step 1

ATTACHING THE FENDERS

PARTS
• 2x Fenders (box I)
• 2x Steps to put on the fenders (box I)
• Front frame (box I)
• Sachet A (6x M5 bolts, 6x M5 spring washers,
6x M5 washers)
1. Take the front frame and fenders out of the box and remove the protective materials.
1
2. Carefully place the front frame onto the central point of the frame (see figure 1).
Attach both fenders to the bottom of the front frame as shown in detail A.
3.
Use two M5 bolts, washers and spring washers from sachet A per fender.
4. Attach both steps to the top of the fenders as shown in detail B, using two M6 bolts,
washers and spring washers from sachet A.
48
A
B
TOOLS
• Phillips screwdriver
• Spanner # 8