SOUNDMASTER SCD1800 Manuel D'instructions page 21

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting the alarm time
The system must be in standby mode in order to set the alarm.
You have the option of setting two alarm times. Proceed as follows:
1. Press the "VOLUME+ / ALARM 1" button for about 3 seconds. The hours of the currently
set alarm time will start to flash.
2. Perform the settings with the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons.
3. Press the "VOLUME+ / ALARM 1" button to confirm. The minutes will start to flash.
4. Perform the settings with "SKIP + / TUNING +" or "SKIP - / TUNING -" button.
5. Press the "VOLUME+ / ALARM 1" button to confirm. Then choose how you would like to be
woken up. Perform the settings with the "SKIP + / TUNING +" or "SKIP - / TUNING -"
buttons. Press the "VOLUME+ / ALARM 1" to confirm.
FM:
As soon as the set alarm time has been reached, the radio will turn on in FM mode.
DAB:
As soon as the set alarm time has been reached, the radio will turn on in CD mode.
CD:
As soon as the set alarm time has been reached, the device will turn on in CD mode.
The inserted CD will be played from the first track.
USB:
As soon as the set alarm time has been reached, the device will turn on in USB mode.
The tracks of the connected storage device will be played from the first track.
BUZZ:
A signal tone will sound when reaching the alarm time.
6. If DAB or FM is selected as wake up function, you must select a stored preset station 1-30.
7. Finally, press the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons to set the alarm
volume. Press the "VOLUME+ / ALARM 1" to confirm.
To set the second alarm time, repeat each of the above steps with the "VOLUME- / ALARM 2"
button.
Snooze
The automatically set alarm function can be switched off for 9 minutes with the "SLEEP /
SNOOZE" button.
Deactivate the sounding wake up tone
Press the "VOLUME+ / ALARM 1" or "VOLUME- / ALARM 2" button to deactivate the sounding
alarm tone.
Activate / Deactivate the alarm
Press in standby mode repeatedly the "VOLUME+ / ALARM 1" or "VOLUME- / ALARM 2" and
choose "Alarm off.
Press in standby mode repeatedly the "VOLUME+ / ALARM 1" or "VOLUME- / ALARM 2" and
choose the desired wake up source.
ALARM
8
SCD1800 / English Instruction Manual

Publicité

Table des Matières
loading

Table des Matières