SOUNDMASTER SCD1800 Manuel D'instructions page 19

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Press three times = the whole CD is played continuously. The display will show "Repeat All".
Press four times = all tracks will be played in random order. The display will show "Random".
Press five times = back to the normal play mode.
MP3-CD:
Press once = the normal play mode. The display will show "Normal".
Press twice = the current track is repeated continuously. The display will show "Repeat One".
Press three times = the selected folder is repeated continuously. The display will show "Repeat
Folder".
Press four times = the whole CD is played continuously. The display will show "Repeat All".
Press five times = all tracks will be played in random order. The display will show "Random".
Press six times = back to the normal play mode.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the "STOP / MENU" button.
2. Press the "SCAN / PROG" button. "P_01" flash in the display (P_01 means the program
number).
3. Use the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons to select the desired track and
press the "SCAN / PROG" button again. The display "P_01" change to "P_02".
4. Select the next track with the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons and
press the "SCAN / PROG" button again. Repeat the procedure until all the desired tracks
are selected.
NOTE:
Once the storage capacity of the tracks to be programmed has been reached "PROGFULL"
will show in the display.
5. Press the "PLAY / PAUSE / CLOCK / ENTER" button to start the programmed playback.
The upper-left of the display will show "MEM".
6. Press once the "STOP / MENU" button to stop the playback while retaining the program.
7. To play the programmed back again, press the "PLAY / PAUSE / CLOCK / ENTER" button.
8. To delete the program, press the "STOP / MENU" button twice. The notification "MEM" will
disappear.
This device has been developed in line with the latest technical advances in the USB field. The
wide range of different USB storage devices of all types which are currently on the market,
unfortunately do not allow us to guarantee full compatibility with all USB storage devices. For
this reason, in rare cases there may be problems in playing back files from USB storage
devices. This is not a malfunction of the device.
1. Press repeatedly the "STANDBY / FUNCTION" button, until "USB" is shown in the display.
SCD1800 / English Instruction Manual
USB
6

Publicité

Table des Matières
loading

Table des Matières