Locomotive Settings; Cv- List For The Br 85; Maximum Speed - Roco 85 DB Serie Manuel

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous
decoder properties to your wishes however. Certain parameters (referred to as CVs – Configu-
ration Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in
the decoder not reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of com-
fort. This means that it can be used together with all of the modern DCC (multiMAUS / Z21
WLAN-MULTIMAUS
The Sounddecoder has been especially modified for the additional functions and must
not be replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the program-
ming track.
▪ CV-Liste of the BR 85
CV Name
1 Address (= short address)
2 Minimum speed (lowest creeping speed)
3 Start-up delay (from standstill to maximum speed)
4 Braking delay (from maximum speed to stand-still)
5

Maximum speed

6 Medium speed (at medium running step)
Value 1 corresponds to 1/3 of Vmax. (CV 5)
7 Decoder Version Number (only read! Readable only on
reading-capable amplifiers/centres).
Important! Please note when using the multiMAUS /
Z21 WLAN-MULTIMAUS
than CV255: when undertaking a short-term program-
ming of CV7, only the subsequent programming access
with the value 10 is increased by 100 CV places
(meaning CV166 then accesses CV266 for example). The
value 20 is increased by 200 CV places.
8 Resetting of all values to the default settings; (With
readable amplifiers/controllers, the manufacturer ID is
readable)
8072270920.indd 27
) and Motorola control devices.
® 2)
in order to achieve CVs greater
®
Value Default
Value
01 – 99 3
01 – 252 1
00 – 255 48
00 – 255 24
00 – 252 120
00 – 252 1
08 = Reset
31.05.2017 06:38:36
27
27