The Sounddecoder; Locomotive Settings - Roco Xrotm Manuel D'utilisation

The Sounddecoder

The Sounddecoder

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous
decoder properties to your wishes however. Certain parameters (referred to as CVs – Configuration
Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in
the decoder not reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of comfort.
This means that it can be used together with all of the modern DCC (Z21 / multi MAUS) and
Motorola control devices.
2)
The Sounddecoder has been especially modified for the additional functions and must
not be replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the
programming track.
30
8072800920 (Quer).indd 30
All manuals and user guides at all-guides.com
02.07.2013 13:16:56