The Sounddecoder (Only For 72127 And 78127); Rh 38.4114 Function Key Allocation (Delivery State); Locomotive Settings - Roco Rh 38.4109 Manuel

▪ Rh 38.4109 function key allocation (delivery state)
The factory-set default adress of the lok is 03.
F-Key Function
Light Front lightsr
F1 Travel sound
F2
Whistle short
F3 Whistle, long
F4
Conductor whistle
F5 Scoop of coal
F6
Shunting range
F7 Air pump
F8 Water pump
F9
Coupling noise
F10 Generator
F11
Sanding
F12 Whistle short
F13 Drain
F14 Mute - key
F15 Screeching
F16
Whistle long
F17 Whistle long

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous deco-
der properties to your wishes however. Certain parameters (referred to as CVs – Configuration Variable
– or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the
decoder not reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of comfort. This
means that it can be used together with all of the modern DCC ( multi MAUS/ multi MAUS
rola control devices.
2)
The Sounddecoder has been especially modified for the additional functions and must not be
replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the programming
track.
8072126920.indd 25
The Sounddecoder
) and Moto-
pro
25
25
28.05.2014 09:34:08