The Sounddecoder (Only For 72151 And 78151); S 160 2255 Function Key Allocation (Delivery State); Locomotive Settings - Roco S 160 2255 USATC Serie Mode D'emploi

▪ S 160 2255 function key allocation (delivery state)

The factory-set default adress of the lok is 03.
F-Key Function
F1 Travel sound
F2 Whistle
F3 Whistle
F4 Conductor whistle
F5
Scoop of coal
F6 Shunting mode
F7
Air pump
F8 Injector
F9
Coupling
F11 Blow-down
F12 Whistle
F13 Drainage (only if F1 is active)
F14 Mute - key
F15 Squeaking points
F20 Rattlesnake

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous decoder proper-
ties to your wishes however. Certain parameters (referred to as CVs – Configuration Variable – or register) can be
amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the decoder not
reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of comfort. This means that
it can be used together with all of the modern DCC ( multi MAUS/ multi MAUS
The Sounddecoder has been especially modified for the additional functions and must not be replaced
with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the programming track.
8072150920.indd 19
The Sounddecoder

pro ) and Motorola 2) control devices.
01.12.2016 11:27:57
19 19
19