Operation With A Dcc Command Station; More Functions; Programming With Märklin; Operation With Märklin 6021 - Roco S 160 2255 USATC Serie Mode D'emploi

▪ Operation with a DCC Command Station

As the multi MAUS/ multi MAUS
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the multi MAUS/ multi MAUS
Reading CVs:
With the appropriate equipment (e.g. Z21 10820 / Rocomotion 10785 or multiZENTRALE
the value byte by byte and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive
speed curve, load control setting or noise synchronization from the detailed handbook. This can be downloaded as
a pdf document MX645P16 from www.zimo.at
▪ Operating with Märklin
More Functions
We are certain that you noticed when trying the set out that not all of the functions which are described in the
"function key mapping" are available in the delivery state.
So that more functions can be addressed with the Märklin
Example
Address (CV1)=3 (default state)
2 address=4
nd
▪ Programming with Märklin
Note: programming is only possible if DIP switch #2 on the back of the Märklin
1. set the speed controller to '0'
2. press stop+go for approx. 1 sec. in order to trigger reset (or disconnect/connect the Station)
3. press stop
4. enter the address or '80'
5. press go during the activation of the change in the direction of travel
6. enter the CV at Märklin
7. activate the change in the direction of travel
8. enter the value in two figures (1-79 possible, enter '80' for value 0)
▪ Operation with Märklin
Attention!
Only Märklin locomotives are included in the Märklin
1)
For docking Roco Locomotives in the Märklin
They are to be set this way:
8072150920.indd 21
(
has 20 function keys and a light button, can be especially comfortably operated.

pro

6021
1)
6021
1)
6021 in two figures in the form of a locomotive address (CV1-79 possible)
1)
Mobile Station
1)
1)
Mobile Station, use one of the two universal numbers 36330/37962.
1)
multi MAUS/ multi MAUS
pro
manual.
pro
6021, you have
1)
6021 has been activated.
1)
Mobile Station Databank.
)
10830), you can read
PRO
01.12.2016 11:27:57
21
21