Operation With A Dcc Command Station (Multimaus); Programming Modes; More Functions - Roco BR 85 009 DB Manuel D'utilisation

▪ Operation with a DCC Command Station (MULTIMAUS)

Because the multiMAUS (from Firmware Version V1.05) has over 28 function keys and a light sensor, it is particularly convenient to operate.
You can also control your locomotives via WLANMAUS for wireless freedom combined with the advantages of the practical multiMAUS.
A further variation for easy operation is the Z21 app via your smartphone or tablet. The app even permits you to easily import all locomotive
data and preset functions from our database.

Programming modes:

We recommend: Direct CV programming (byte-wise) or POM mode (programming on the main track).
The programming process is described in the multiMAUS/WLANMAUS manual. You can find information on programming with the Z21 app under
https://www.z21.eu/de/z21-system/z21-app/tutorials
Reading CVs:
With the appropriate equipment (e.g. / Z21 / z21 / z21start ), you can read the value.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive speed curve, load control
setting or noise synchronization from the detailed handbook. This can be downloaded as a pdf document MX645P22 from www.zimo.at.
72272.indd 45 72272.indd 45
45
14.04.2021 08:21:59 14.04.2021 08:21:59