LawnMaster GT1454 Manuel D'utilisation page 4

GENERAL SAFETY RULES
• Keep proper footing and balance at all times.
• Take care against injury from any device fitted for trimming the filament line length. After extending
new cutter line always return the grass trimmer to its normal operating position before switching on.
• Never fit metal cutting elements.
• Never use replacement parts or accessories not provided or recommended by the manufacturer.
• Disconnect the grass trimmer from the outlet before checking, cleaning or working on the grass
trimmer and when it is not in use.
• Only use identical replacement parts when servicing a tool with double insulation. Servicing should
be performed by a qualified technician.
• Always ensure that ventilation openings are kept clear of debris.
• Avoid unintentional starting. Do not carry plugged-in appliance with finger on switch.
• Do not abuse the cord. Never carry appliance by the cord or yank it to disconnect from outlet.
Keep the cord from heat, oil, and sharp edges.
• It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR GRASS TRIMMER
• Do not expose to moisture.
• Use only on AC outlets supply voltage shown on the product rating label.
• Avoid operating your trimmer in wet grass, where feasible.
• Do not use in rain.
• On slopes, be extra careful of your footing and wear nonslip footwear.
• Do not walk backwards when trimming, you could trip.
• Always walk when operating the trimmer, never run.
• Switch the trimmer off before going over surfaces other than grass.
• Never pick up or carry a trimmer by the cord.
• Do not lean over the trimmer guard as objects may be throw by the cutting line.
• Keep all nuts, bolts and screws tight to be sure the trimmer is in safe working condition.
• To avoid the risk of injury keep fingers and hands clear of the line cutter on the leading edge of
the guard.
• After use, disconnect the machine from the outlet and check for damage
• When not in use, tools should be stored indoors in a dry and high, or locked-up place – out of
reach of children.
4