Disassembling Procedure - L-Acoustics Coaxiale XT Serie Mode D'emploi

4. Fix the enclosure to the U-bracket as described below:
a. Insert the enclosure's pole-mount socket into the U-bracket's stud.
b. Rotate the pivoting arm back into position: the spring-loaded safety should lock automatically.
c. Select the desired enclosure's orientation and firmly screw the knob.
!
Verify that the pivoting arm is correctly secured by checking that it cannot move freely
and that the spring-loaded safety is fully engaged.
Verify that the enclosure is correctly secured to the U-bracket by checking that it cannot
rotate freely.
WARNING
L-ACOUSTICS
!
A safety eyebolt accessory can be added using the M8* insert located on the rear face of the
SB15P enclosure (see Figure 23).
WARNING
* The "M8" notation refers to the European standard (please see applicable external documentation).
6.4.2

Disassembling procedure

The disassembling procedure is the exact reversed sequence of the assembling procedure.
XT-P_RM_ML_2.0
c.
b.
Figure 20: Securing the SB15P to the ETR15P
® recommends using an additional safety point when rigging enclosures.
w w w . l - a c o u s t i c s . c o m
a.
EN
21 en