Disassembling Procedure - L-Acoustics Coaxiale XT Serie Mode D'emploi

4. Fix the enclosure to the U-bracket as described below:
a. Insert the enclosure's pole-mount socket into the
U-bracket's stud.
b. Rotate the pivoting arm back into position.
c. Select the desired enclosure's orientation and firmly
screw the knob.
d. Secure the safety pin on the pivoting arm.
Verify that the pivoting arm is correctly
secured by checking that it cannot move
!
freely and that the safety pin is fully
engaged in locking position.
Verify that the enclosure is correctly
WARNING
secured to the U-bracket by checking
that it cannot rotate freely.
L-ACOUSTICS
!
A safety eyebolt accessory can be added using the M8* insert located on the rear face of the
8XT enclosure (see Figure 23).
WARNING
* The "M8" notation refers to the European standard (please see applicable external documentation).
6.1.2

Disassembling procedure

The disassembling procedure is the exact reversed sequence of the assembling procedure.
XT-P_RM_ML_2.0
recommends using an additional safety point when rigging enclosures.
®
w w w . l - a c o u s t i c s . c o m
b.
d.
a.
Figure 11: Securing the enclosure to the ETR8-2
c.
EN
15 en