Ac Voltage + Ac Amperage Function - Klein Tools CL450 Manuel D'utilisation

ENGLISH
AC VOLTAGE + DC VOLTAGE FUNCTION
1. Insert RED test lead into VΩ jack
COM jack
AC/DC voltage V
measurement. Long press the SEL button
ACV + DCV mode.
Black lead Red lead
2. Apply test leads to the circuit to be tested to measure voltage.
The meter will auto-range to display the measurement in the
most appropriate range. The ACV + DCV measurement will
be in the main display, and the secondary display will have the
individual voltages that toggle between the AC and DC voltages.
3. Long press the SEL button

AC VOLTAGE + AC AMPERAGE FUNCTION

1. Insert RED test lead into VΩ jack
COM jack
AC/DC voltage V
measurement. To measure DC, press the SEL button
between AC and DC modes. The AC or DC icon on the LCD
indicates which mode is selected. Press the V+A/Inrush button
to enter the ACV + ACA mode.
Black lead Red lead
2. Press clamp trigger
current-carrying wire.
3. The main display will show AC Voltage and the secondary
display will show AC Amperage.
4. Press V+A/Inrush button
12
OPERATING INSTRUCTIONS
, and rotate function selector switch
4
/
, and rotate function selector switch
4
/
to open clamp
13
, and BLACK test lead into
5
setting. The meter defaults to AC
to exit the mode.
9
, and BLACK test lead into
5
setting. The meter defaults to AC
to exit.
10
to the
2
to enter the
9
to the
2
9
and place around
3
to toggle
10