Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Set the steam control to position
1
Fill the water tank up to the MAX indication (Fig. 3).
2
Close the water filling door.
3
Selecting temperature and steam setting
Table 1
Fabric type
Linen
Cotton
Wool
Silk
Synthetic fabric
(e.g. acrylic, nylon,
polyamide, polyester)
Note: As indicated in the table above, do not use steam or steam boost at a
low temperature, otherwise hot water may leak from the iron.
Consult table 1 to set the temperature dial to the appropriate
1
setting for your garment. (Fig. 4)
Select Auto steam setting in the steam slider. (Fig. 5)
2
This iron is equipped with Auto steam control. According to the
temperature you select, the iron automatically provides the optimal
amount of steam for the best result.
Place the iron on its base and connect the base to a power socket.
3
(Fig. 6)
. (Fig. 2)
Temperature
Auto steam
setting
control
MAX
Automatically
adjusted to the
●●●
optimal amount
●●
●●
●
No steam
ENGLISH
7
Steam
boost
Yes
Yes
No
No
No
Publicité
Table des Matières
