Child Safety; In The Event Of Faults And Failures - BORETTI CRG916 Notice D'utilisation

6.9 Child safety

the radiant elements can be deactivated.
Turn the first two knobs on the left
anticlockwise simultaneously and keep
them in this position for least 2 seconds,
until all the displays show symbol .
After a few minutes the symbols switch
off, but the radiant elements will not
activate and the above-mentioned lock symbols appear on all displays if any
knob is turned.
The deactivation has no time limit. A prolonged power failure may cancel this
deactivation.
To reactivate the radiant elements, turn the first two knobs on the left
anticlockwise simultaneously.

6.10 In the event of faults and failures

if a defect is noticed, switch off the appliance and turn off the electrical
supplying.
Do not attempt to use a faulty radiant element until it is repaired by the
authorised Technical Support Service.
Any repairs must be carried out exclusively by qualified personnel. Do not
open the appliance for any reason.
If the glass surface is damaged, switch off the appliance immediately to
prevent the risk of electric shocks and contact the Technical Support Service.
If a radiant element is faulty, the remaining elements can still be used normally.
To clear the error code from the displays, set all the knobs to "off" position and
set new power values.
The following list includes the most frequent failures, the causes of which can
be removed by the user or via the Technical Support Service.
46