Installation; General Warnings - BORETTI CRG916 Notice D'utilisation

3. Installation

3.1 General warnings

the following operations must be carried out by a qualified installing technician.
The installing technician is responsible for correctly installing the appliance
according to current safety standards. Before using the appliance, remove the
protective plastic on the control panel, stainless steel parts, etc...
After installation the installer must fully test the appliance and ensure it
operates correctly before handing it over to the customer. The manufacturer
declines any responsibility for damage incurred by persons, animals or objects
that is caused by not following the above guidelines (cfr. chapter "2. Warnings
for safety and use").
The technical data is indicated on the plate located on the back of the
appliance. The adjustment conditions are shown on a label applied to the
packing and the appliance.
Note:
Do not use the oven door handle for lifting or handling, including while
unpacking the appliance.
12