Features - Ryobi JS480L Manuel D'utilisation

PRODUCT SPECIFICATIONS
Input ......................... 120 Volts, AC Only, 60 Hz, 4.8 Amps
No Load Speed ...........................................600-2600/min.
Stroke Length ........................................................... 3/4 in.
KNOW YOUR JIG SAW
See Figure 1, page 13.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BASE ADJUSTMENT LEVER
Using the base adjustment lever, you can make quick changes
to the bevel setting. The base can be angled 45˚ left or right
for bevel cutting, with indicators in 15˚ increments.
BLADE SUPPORT ROLLER
The blade-support roller is recessed to ensure accurate
cutting.
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may
contain chemicals, including lead, known the State of California to cause cancer, birth defects or other reproductive
harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.

FEATURES

Orbital Settings ................................................................. 4
Net Weight ...............................................................4.6 lbs.
LED LIGHT
The LED light illuminates your work to give you a clear view
of the cut line.
LOCK-ON BUTTON
The lock-on button allows continuous operation.
ORBITAL ADJUSTMENT KNOB
The orbital adjustment knob allows you to select four orbital
settings to cut materials of varying thickness and density.
RAPID CHANGE BLADE CLAMP
There is a convenient lever on the blade clamp for changing
saw blades without the need for seperate tools.
VARIABLE SPEED CONTROL SELECTOR
The jig saw has a variable speed control selector to allow
operator control of speed and power limits.
7 — English