Technical Information; Product Safety Information - Accu-Chek Aviva Connect Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9

Technical Information

Bluetooth
Wireless Technology
®
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Industry Canada ICES-003 Compliance Label:
CAN ICES-3 (B)/NMB-3(B)
Electromagnetic Compatibility – This meter meets the electromagnetic immunity requirements as per
EN ISO 15197. The chosen basis for electrostatic discharge immunity testing was basic standard
IEC 61000-4-2. In addition, the meter meets the electromagnetic emissions requirements as per EN 61326.
The meter's electromagnetic emission is thus low. Interference from the meter to other electrically-driven
equipment is not anticipated.
Performance Analysis – Refer to the test strip package insert.
Test Principle – Refer to the test strip package insert.
Declaration of Conformity – Roche Diagnostics hereby declares that the Accu-Chek Aviva Connect blood
glucose meter conforms with the basic requirements and other relevant regulations of the European
Directive 1999/5/EC. The conformity declaration may be found at the following Internet address:
http://declarations.accu-chek.com

Product Safety Information

w WARNING
• Strong electromagnetic fields may interfere with the proper operation of the meter. Do not use the
meter close to sources of strong electromagnetic radiation.
• To avoid electrostatic discharge, do not use the meter in a very dry environment, especially one in
which synthetic materials are present.
88

Publicité

Table des Matières
loading

Table des Matières