Delete All - JVC KD-R951BT Manuel D'instructions

BLUETOOTH®
Select a contact by name
• You can search through the contacts quickly according to the first
letter (A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [PHONEBOOK], then press the
knob.
3 Press 1 K / 2 J to select the desired letter.
4
Turn the volume knob to select a name, then press the knob.
5 Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous setting item or hierarchy, press G T/P.
Store a contact in memory
You can store up to 6 contacts.
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or
[DIAL NUMBER], then press the knob.
3 Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact
is stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in
2
step and store a blank number.
Make a call from memory
1 Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO PRESET" appears if there is no contacts stored.
12
Delete a contact
Not applicable for mobile phone that supports PBAP.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK], then press
the knob.
3
Turn the volume knob to select a contact or a phone number.
4 Press and hold G T/P.
5 Turn the volume knob to select [DELETE] or [DELETE ALL], then press the
knob.
DELETE: Selected name or phone number in step
DELETE ALL: All names or phone numbers from the selected menu in step
is deleted.
6
Turn the volume knob to select [YES] or [NO], then press the knob.
Bluetooth mode settings
1
Press and hold MENU.
2
Turn the volume knob to select [BLUETOOTH], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
PHONE
Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name.
AUDIO
Shows the connected phone name using the JVC Smart Music Control *
APPLICATION
app. " " appears in front of the device name.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PRIORITY Selects a device to be connected as priority device. " " appears in front of
the device name set as priority.
• "NO PAIR" appears if there is no registered device found.
3
is deleted.
2
Default: XX
1