Intended Use; General Power Tool Safety Warnings; Electrical Safety; Personal Safety - Panasonic EY3640 Instructions D'utilisation

Original instructions: English
EN
Translation of the original instructions:
Other languages
I .

INTENDED USE

Thank you for purchasing the Panasonic
Sealing Gun. This Sealing Gun is for pushing
the sealing compounds. Sausage type and
cartridge type are applicable for this model.
The speed can be adjusted according to
work.
II.
GENERAL POWER
TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
1) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2) Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of fl ammable liquids gases
or dust.
Power tools create sparks which may
ignite the dust or fumes.
3) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose con-
trol.

Electrical safety

1) Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
2) Avoid body contact with earthed or
grounded surfaces such as pipes, radi-
ators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
3) Do not expose power tools to rain or
wet conditions.
Water entering a power tool will increase
the risk of electric shock.
4) Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the
risk of electric shock.
5) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
6) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of RCD reduces the risk of electrical
shock.

Personal safety

1) Stay alert, watch what you are doing
and use common sense when operat-
ing a power tool. Do not use a power
tool while you are tired or under the
infl uence of drugs, alcohol or medica-
tion.
A moment of inattention while operating
power tools may result in personal injury.
2) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hear-
ing protection used for appropriate condi-
tions will reduce personal injuries.
3) Prevent unintentional starting.
Ensure the switch is in the offposition
before connecting to power source
and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your fi nger on
the switch or plugging in the power tools
that have the switch on invites accidents.
- 6 -