Bosch JS120 Consignes De Fonctionnement/Sécurité page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BM 2610033457 06-14_JS120 6/5/14 12:02 PM Page 8
Disconnect battery pack from tool or place the switch in the locked or
W RNING
off position before making any assembly, adjustments or changing
accessories. Such preventive safety measures reduce the risk of starting the tool
accidentally.
BLADE INSTALLATION AND REMOVAL
To prevent damage, do not
C UTION
turn blade ejector lever when
there is no blade in the blade clamp or when
inserting the blade.
BLADE INSTALLATION
Insert the saw blade (teeth in cutting direction)
into the slot in the blade clamp until the blade
ejector lever rotates to the LEFT, indicating that
the clamp has engaged. (When inserting the
saw blade, the back of the blade must rest in
the groove of the guide roller Fig. 2.)
BLADE EJECTION
The tool should be held so that the blade is
safely ejected. To remove the saw blade, rotate
the blade ejector lever to the RIGHT to the
center stop; this releases and ejects the saw
blade (Fig. 3).
BLADE CLAMP RESET – There are two
situations in which it is necessary to reset
the blade clamp:
RESET Type A: If the blade ejection lever is
rotated improperly, the "fingers" within the
clamp may slip into the blade insert slot. To
reset the clamp:
Step 1 – Using a a screwdriver, push down on
blade clamp fingers (as viewed from the bottom
of the jig saw), until clamp can be rotated.
Step 2 – Rotate blade ejector lever to the
RIGHT until it locks into place.
The clamp is now ready for use.
RESET Type B: If the two fingers inside the
blade clamp accidentally get pushed too far into
the plunger, they will prevent insertion of a
blade. To bring the fingers back to their
correction positions:
Step 1 – Turn the blade ejector lever to the
RIGHT (as viewed from the bottom of the jig
saw)
Step 2 – Continue the rotation unto fingers will
snap into the correct open position.
The clamp is now ready for use.
Assembly
BL DE
BL DE CL MP IN OPEN POSITION
( s viewed from the bottom)
BL DE
BL DE CL MP IN LOCKED POSITION
( s viewed from the bottom)
-8-
FIG. 2
BL DE
CL MP
LEVER
FINGERS
FIG. 3
BL DE
CL MP
LEVER
BL DE

Publicité

Table des Matières
loading

Table des Matières