Frost Protection; Faults - Kärcher Tornado BR 40/25 C Bp Mode D'emploi

Replacing the disk brushes
Empty the dirty water reservoir.
Press the appliance down using the push
handle.
Turn the running gear to the front with
your foot.
Turn the button for setting the advance
speed in – direction.
Raise the disk brushes.
Turn the disk brushes through approxi-
mately 45°.
Remove the disk brushes downwards.
Insert the new disk brushes in reverse
sequence.
Set the advance speed.
Turn the running gear to the rear with
your foot.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.

Frost protection

In case of danger of frost:
Empty the fresh and dirt water reser-
voirs.
Store the appliance in a frost-protected
room.

Faults

Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any works on the ap-
pliance.
Drain and dispose of the dirt water and
the residual fresh water.
In case of faults that cannot be remedied us-
ing the table below, please contact the cus-
tomer service.
14
English