Maintenance And Care; Maintenance Schedule; Maintenance Tasks - Kärcher Tornado BR 40/25 C Bp Mode D'emploi

To reduce the required space the push han-
dle can be turned to the front:
Release the star grips of the push handle
fastening.
Turn the push handle to the front.

Maintenance and Care

Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any work on the ap-
pliance.
Drain and dispose of the dirt water and
the residual fresh water.

Maintenance Schedule

After working
Warning
Risk of damage. Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.
Drain off dirt water.
Check the fluff filter, clean if required
Clean the outside of the appliance with a
damp cloth which has been soaked in
mild detergent.
Clean the vacuum lips and the splash-
guard, check for wear and replace if re-
quired.
Check the brushes for wear, replace if
required.
Charge the batteries if required.
Monthly
If appliance is temporarily out of use:
perform an adjustment charge of the bat-
tery.
Check the battery pole for oxidation. If
required, brush off and apply pole
grease. Ensure stability of the connect-
ing cables.
Check the condition of the seals between
dirt water reservoir and cover, replace if
required.
Check for acid leaks on the cells of non-
maintenance-free batteries.
Clean the brush tunnel. (BR model only)
Yearly
Have the prescribed inspection carried
out by the customer service.

Maintenance Tasks

Replacing the vacuum lips
Remove the vacuum bar.
Unscrew the star grips.
Remove the plastic parts.
Remove the vacuum lips.
Insert new vacuum lips.
Insert the plastic parts.
Screw in and tighten the star grips.
Replacing the brush rollers
Empty the dirt water reservoir.
Press the appliance to the bottom using
the pushing handle.
Swing the running gear to the front with
your foot.
Press in the brush and remove down-
wards.
Insert the new brush roller and lock into
place.
Swing the running gear backwards with
your foot.
13
English