Displaying General Device Information; Displaying Remote Access Over Internet; Displaying Network Configuration; Displaying Access Point Information - Resol KM2 Manuel

9.3

Displaying general device information

In order to display general device information, proceed as follows:
Î Click the Status main menu.
The following information will be disyplayed in Status:
• Device name
• Current date and time settings of the KM2 Communication module
• Device uptime
• Device serial number
• Firmware version
• Support report
9.4

Displaying remote access over Internet

In order to display the status of the remote access via Internet, proceed as follows:
Î Click the Status main menu.
The following information will be displayed in Remote access over Internet:
• Owner e-mail address
• Access code (Token)
9.5 Displaying network configuration
In order to display the network configuration, proceed as follows:
Î Click the Status main menu.
The following information will be displayed in LAN:
• LAN IP address
• LAN MAC address
9.6

Displaying Access point information

In order to display the status of the remote access via Internet, proceed as follows:
Î Click the Status main menu.
The following information will be displayed in Access point:
• Network name (SSID)
• Encryption
26
9.7

Changing the Web interface language

The Web interface can be run in different languages.
Î Click one of the small flags on the right-hand side of the Home screen, accord-
ing to the desired language:
• German
• English
• French
• Spanish
• Italian
The language has been changed for this session. In order to change the language for
further sessions, proceed as follows:
Î In the Configuration main menu, select the General submenu.
Î On the General Configuration tab, in the dropdown menu Language, se-
lect one of the following languages:
• Deutsch (de)
• English (en)
• Français (fr)
• Español (es)
• Italiano (it)
Î Click Save configuration.
9.8 Configuring the user mode
The user mode of the Web interface can be changed from standard user to expert
and vice versa. In the expert mode, additional information and settings will be avail-
able, such as: LAN configuration, LAN information, firmware updates, etc.
In order to adjust the user mode, proceed as follows:
Î In the Configuration main menu, select the General submenu .
Î In order to activate the expert mode, select Yes in the Expert mode menu. In
order to deactivate the expert mode, select No.
Î Click Save configuration.