Information About The Product; Ce Declaration Of Conformity - Resol DeltaSol MX Mode D'emploi

Safety advice
Please pay attention to the following safety advice
in order to avoid danger and damage to people and
property.
Instructions
Attention must be paid to the valid local standards,
regulations and directives!
Target group
These instructions are exclusively addressed to au-
thorised skilled personnel.
Only qualified electricians should carry out electrical
works.
Description of symbols
WARNING! Warnings are indicated with a warn-
ing triangle!
Î They contain information
on how to avoid the danger
described.
Signal words describe the danger that may occur,
when it is not avoided.
• WARNING means that injury, possibly life-threat-
ening injury, can occur.
• ATTENTION means that damage to the appli-
ance can occur.
Î Arrows indicate instruction steps that should be
carried out.
Note
Notes are indicated with an information
symbol.
14

Information about the product

Proper usage
The extension module is designed for use in combi-
nation with a controller equipped with a VBus
interface in compliance with the technical data speci-
fied in this manual.
Improper use excludes all liability claims.
CE-Declaration of conformity
The product complies with the relevant di-
rectives and is therefore labelled with the
CE mark. The Declaration of Conformity
is available upon request, please contact
RESOL.
Note
Strong electromagnetic fields can impair the
function of the device.
Î Make sure the device as well as the sys-
tem are not exposed to strong electro-
magnetic fields.
Disposal
• Dispose of the packaging in an environmentally
sound manner.
• Dispose of old appliances in an environmentally
sound manner. Upon request we will take back
your old appliances bought from us and guarantee
an environmentally sound disposal of the devices.
Subject to technical change. Errors excepted.
© 20120206_48006450_EM.mon4s.indd
Contents
1 Overview ................................................. 15
2 Installation .............................................. 16
2.1 Mounting ................................................................ 16
® data
2.2 Electrical connection ........................................... 17
2.3 Data communication / Bus ................................. 17
3 Operation ................................................ 18
3.1 Buttons ................................................................... 18
2.4 Selecting channels and adjusting values ........... 18
2.5 Slide switch ............................................................ 18
3.2 Flashing codes and warning symbols ................ 18
4 Initial commissioning ............................. 19
5 Menu system ........................................... 19
5.1 Channel overview ................................................ 19
5.2 Display channels .................................................... 20
5.3 Adjustment channels ........................................... 20
6 Troubleshooting ...................................... 21
7 Accessories ............................................. 22
7.1 Sensors ................................................................... 22