Built-In Fm Radio And External Mp3 Player (Cable Option); Fm Radio - SCHUBERTH SRC-System Guide D'utilisation

Masquer les pouces Voir aussi pour SRC-System:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
1. Turn on your MP3 Player or Adapter, and make sure that its Bluetooth®
function is activated.
2. with the SRC‑System™ headset turned ON, press and hold the
Mobile Button for at least six seconds until the Red and Blue Lights
begin alternating rapidly:
3. Search for Bluetooth® headsets on your MP3 Player by following the
device's instructions.
NOTe: For use of a Bluetooth® adapter, follow the device's instructions.
4. After a few seconds the MP3 Player will list "SRCS" (incl. its software
version) as a discovered device. Select it and follow your MP3
Player's instructions to accept the pairing.
5. If your MP3 player prompts for a PIN or Passkey enter 0000 (four zeros).
6. Once pairing is complete, your MP3 Player or Adapter may confirm
that pairing has succeeded, and the headset will begin flashing
slowly in Blue.
NOTe: If the Pairing process is not completed within two minutes the
headset will return to Standby mode.
Operating your A2DP source from your headset
Play
press and hold the MP3 Button for 3 seconds
Pause / Stop*
press and hold the MP3 Button for 3 seconds
Forward
press and hold the Volume Up Button for 3 seconds
Rewind**
press and hold the Volume Down Button for 3 seconds
* Varies depending on your mobile phone
** with some phones you may need to repeat this action once more
30
QG SRC 207 - MAN00015.indd 30
7. BUILT-IN FM RADIO AND EXTERNAL MP3
PLAYER (CABLE OPTION)

7.1 FM RADIO

The SRC‑System™ is equipped with an FM stereo radio receiver and
RDS (Radio Data System) technology.
turn on the radio
while in Standby mode, press and hold the CHAN-
NEL "B" button for 3 seconds
turn off the radio
while listening to the Radio, press and hold the
CHANNEL "B" button for 3 seconds
Switch to next
while listening to the Radio, tap the CHANNEL "B"
preset station
button to cycle through the 6 Preset FM Stations
Start Intercom call
while listening to the Radio, start talking loudly
Initiate Voice Dial
while listening to the Radio, tap the Mobile Button
from your mobile
and pronounce loudly the name of the person you
Phone
wish to call. This feature is supported only by mobile
phones that include the Voice Dial feature
Initiate Redial from
while listening to the Radio, tap the Mobile Button
your mobile Phone
twice
RDS ON/OFF
while the Radio is on, press and hold Volume Up and
(Default: OFF)
Volume Down Buttons simultaneously for 3 seconds
Thanks to the RDS feature, your headset will automatically select the
strongest signal available for the FM station you wish to listen to, no
matter where you are riding. This allows you to leave your hands on
the handlebars at all times with no need to adjust the radio station
frequency while you are in motion.
2/1/11 11:38 AM

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières