Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch Professional GOP 250 CE Notice Originale

OBJ_BUCH-1271-001.book Page 19 Thursday, July 8, 2010 10:58 AM

Technical Data

Precision Saw
Article number
Preselection of
orbital stroke rate
Rated power input
Output power
No-load speed n min
0
Oscillation angle,
left/right
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.

Noise/Vibration Information

Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 81 dB(A);
Sound power level 92 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Sanding: Vibration emission value a
2
uncertainty K=1.5 m/s
Cutting with plunge cut saw blade: Vibration
emission value a =10 m/s
h
2
K=1.5 m/s
Cutting with segmential saw blade: Vibration
emission value a =6.5 m/s
h
2
K=1.5 m/s
Scraping: Vibration emission value a
2
uncertainty K=1.5 m/s .
Bosch Power Tools
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
GOP 250 CE
may be used to compare one tool with another.
Professional
It may be used for a preliminary assessment of
3 601 B30 000
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
W 250
different accessories or poorly maintained, the
W 150
vibration emission may differ. This may signifi-
-1
8000–20000
cantly increase the exposure level over the total
working period.
° 1.4
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
kg 1.5
nificantly reduce the exposure level over the to-
/II
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC
D-70745 Leinfelden-Echterdingen
2
=2 m/s ,
Dr. Egbert Schneider
h
Senior Vice President
Engineering
2
, uncertainty
2
, uncertainty
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
2
=4.5 m/s ,
Leinfelden, 01.07.2010
h
English | 19
Dr. Eckerhard Strötgen
Head of Product
Certification
2 609 140 769 | (8.7.10)