Changing The Tool - Bosch Professional GOP 250 CE Notice Originale

OBJ_BUCH-1271-001.book Page 20 Thursday, July 8, 2010 10:58 AM
20 | English
Assembly

Changing the Tool

Before any work on the machine itself, pull
the mains plug.
Wear protective gloves when changing
application tools/accessories. Contact with
the application tool/accessoriy can lead to
injuries.
Selecting the Application Tool/Accessory
Accessory
HCS wood
segment saw
blade*
BIM segment
saw blade*
HCS plunge
cut saw
blades,
wood*
BIM plunge
cut saw
blades,
metal*
BIM plunge
cut saw
blade, wood
and metal*
HM-Riff seg-
ment saw
blade*
HM-Riff delta
plate*
* Optional accessory; for the complete accessories
please see Bosch accessory programme.
2 609 140 769 | (8.7.10)
Material
Wooden mate-
* Optional accessory; for the complete accessories
rials, plastic
please see Bosch accessory programme.
Mounting/Replacing the Application Tool/
Wooden mate-
Accessory
rials, plastic,
non-ferrous
If required, remove an already mounted applica-
metals
tion tool/accessory.
Wooden mate- For removing the application tool/accessory,
rials, plastic, loosen the screw 7 with the Allen key 8 and re-
gypsum and move the application tool/accessory.
other soft ma-
Mount the requested application tool/accessory
terials
(e.g. plunge cut saw blade 6) in such a manner
on the tool holder 4 that the offset faces down-
Metal (e.g.
ward (see illustration on the graphics page;
unhardened
marking on the application tool/accessory is
nails, screws,
readable from above).
smaller pro-
Turn the application tool/accessory to a position
files), non-fer-
favourable for the respective job, and allow it to
rous metals
engage into the cams of the tool holder 4. 12 dif-
Wood, metal,
ferent positions are possible, each offset by 30°.
non-ferrous
For more intermediate positions, the adapter 9
metals
(accessory) can be used: Allow the adapter to
engage with the smooth side onto the cams of
Grouting
the tool holder 4 (see illustration on the graph-
joints, soft
ics page). Position the application tool/accesso-
wall tiles,
ry onto the adapter in any position.
glass-fibre re-
Fasten the application tool/accessory with bolt 7.
inforces plas-
Tighten the bolt with Allen key 8 until the spring
tic and other
washer of the bolt faces flush against the applica-
abrasive mate-
tion tool/accessory.
rials
Check the tight seating of the application
tool/accessory. Incorrect or not securely fas-
tened application tools/accessories can come
loose during operation and pose a hazard.
Accessory Material
Scraper, Carpets,
rigid* coverings
Scraper, Silicone and
flexible* other elastic
materials
Base plate Depends on
for sanding, sanding sheet
series Delta
93 mm*
Bosch Power Tools