Required Accessories And Tools; Supplied Accessories; Optional Accessories; Other Required Accessories - Bosch B30BB830SS Notice De Montage

Réfrigérateur / congélateur combiné
Masquer les pouces Voir aussi pour B30BB830SS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Required accessories and tools

Supplied accessories

Installation instructions
Operating instructions
Installation kit

Optional accessories

Heater Kit for Side-by-Side installation BOHEATKIT10
If the gap between the appliances is less than 6" (160 mm).

Other required accessories

Ice maker installation kit
For connecting appliances which require water,
e.g. for an ice maker.
Maximum outer diameter of the water pipe
3
(without fittings):
/
" (9.5 mm).
8

Other

Stepladder
Dolly, hand truck
Hammer drill for drilling holes in wall or floor
Bits according suitable for material and in different
sizes
Wooden beam (cross section min. 3" x 4") as an
alternative tilt protection, length according to the
width of the installation cavity
Wooden screws in different sizes
1
Thin (max.
/
" (1.5 mm)), suitable material to
16
protect the floor from damage (e.g. lino)
Suitable material for covering and protecting
furniture (e.g. protective sheets)
Adhesive tape
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
10
1
/
" OD copper line
4

Tools

Cordless screwdriver
Torx bit T20 and T30 +
magnetic holder
Torx screwdriver T20
5
/
" (8 mm) hex nut driver
16
Wood drills in different sizes
1
Open end wrench
/
"
2
(Width across flats 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure,
folding rule
Square
Level, length 2' (60 cm) and
4' (1,2 m)

Publicité

Table des Matières
loading

Table des Matières