Required Accessories And Tools; Supplied Accessories; Optional Accessories; Other Required Accessories - Bosch B36IT800NP Notice De Montage

Required accessories and tools

Supplied accessories

Installation instructions

Operating instructions

Installation kit


Optional accessories

Heater Kit for Side-by-Side installation XHEATKIT10
If the gap between the appliances is less than 6" (160 mm).
Panel unification part (Metal strip) FPCONNBF10
For connection of two door panels. Can be used for
standard height door panels without further preliminary
work.

Other required accessories

Ice maker installation kit
For connecting appliances which require water,
e.g. for an ice maker.

Other

Stepladder

Dolly, hand truck

Hammer drill for drilling holes in wall or floor

Bits according suitable for material and in different

sizes
Wooden beam (cross section min. 3" x 4") as an

alternative tilt protection, length according to the
width of the installation cavity
Wooden screws in different sizes

1
Thin (max. / " (1.5 mm)), suitable material to

16
protect the floor from damage (e.g. lino)
Suitable material for covering and protecting

furniture (e.g. protective sheets)
Adhesive tape

Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
10
1
/ " OD copper line
4

Tools

Cordless screwdriver
Torx bit T20 and T30 +
magnetic holder
Torx screwdriver T20
5
/ " (8 mm) hex nut driver
16
Wood drills in different sizes
1
Open end wrench / "
2
(Width across flats 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure,
folding rule
Square
Level, length 2' (60 cm) and
4' (1,2 m)