Control Sounds And Operation Sounds; Memory Function; Protection Circuit - NSK VOLVERE i7 Mode D'emploi

7-2 Control Sounds and Operation Sounds

Description
1 Power ON
2 Button operations
3 Overload warning
Auto Cruise ON
4
Auto cruise standby mode

7-3 Memory Function

The product memorizes its status when the power is turned OFF. That status is recalled the next time the power is
turned ON.

7-4 Protection Circuit

If you operate the motor with a load exceeding the limit or when the bur cannot rotate, the product will emit beeps
(overload notification function). The beeping will stop when the load is reduced, but if the overlaod continues the
protection circuit will automatically stop the power supply to the motor to prevent danger and damage to the product.
Disabling the Overload Notification Function (Beeping)
Press and hold the Auto Cruise Key during rotation to disable the overload notification sound.
To activate the notification sound again, repeat the same procedure.
• When the overload notification function is disabled, take care of heat generation due to the motor
CAUTION
overload.
LED Sound
Turns on Two beeps
Turn on/turn off One beep
- Keeps beeping
Flashes Two beeps
Turns on One beep
11
Remarks
-
-
Refer to 7-4 to disable the
overload notification function.
-
-