Remington RM4040 Manuel De L'utilisateur page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's
manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL
MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in
conjunction with other symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
manual(s) and follow all warnings and safety
instructions. Failure to do so can result in serious
injury to the operator and/or bystanders.
• WEAR HEAD, EYE AND HEARING PROTECTION
WARNING:
noise can cause severe eye injury and hearing loss.
Wear eye protection meeting current ANSI / ISEA
Z87.1 standards and ear protection when operating
this unit. Wear head protection when operating this
unit; falling objects can cause severe head injury. Use
a full face shield when needed.
• WEAR FOOT PROTECTION
Always wear heavy-duty, non-slip footwear when
operating this unit.
• WEAR HAND PROTECTION
Always wear heavy-duty, non-slip gloves when
handling this unit.
V
• VOLTS - Voltage
A
• AMPERES - Current
Hz
• HERTZ - Frequency (cycles per second)
AC
• ALTERNATING CURRENT - Type of current
• DIRECT CURRENT - Type of current
or DC
Ah
• AMPERE-HOUR - Measure of charge capacity
Wh
• WATT-HOUR - Measure of energy
• SAFETY & INTERNATIONAL SYMBOLS •
Read the operator's
Thrown objects and loud
SYMBOL
MEANING
• USE BOTH HANDS
WARNING:
while operating the unit. Never use only one hand to
operate the unit.
• KICKBACK
WARNING:
with any object should be avoided. Tip contact may
cause the guide bar to move suddenly upward and
backward, which may cause serious injury.
• KEEP BYSTANDERS AWAY
WARNING:
especially children and pets, at least 50 feet (15 m) from
the operating area.
WARNING:
area and retreat path. Be aware of the location of
limbs/branches to avoid falling limbs and debris.
• CHAIN OIL
Make sure the chain oil reservoir is full before
operation. Check the oil level constantly so that it
does not drop below half full. The saw chain must be
continuously coated with oil to function properly.
• CHAIN DIRECTION
Make sure the saw chain faces the direction shown
when installed on the guide bar. Refer to Installing the
Guide Bar and Saw Chain in the Maintenance section.
• DO NOT USE IN THE RAIN
WARNING:
environments. Never operate the unit in the rain or in
damp or wet conditions. Moisture is a shock hazard.
• DO NOT DISPOSE IN HOUSEHOLD TRASH
Recycle the battery or dispose of the battery
according to local, state and federal regulations.
9
Always use both hands
Contact of the guide bar tip
Keep all bystanders,
Always keep a clear work
Avoid dangerous

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rm4040b

Table des Matières