Raising And Lowering The T-Top - Williams EvoJet Serie Mode D'emploi

Raising and Lowering the T-Top

WARNING.
sure that the cam
levers are fully engaged
and locked into position
prior to getting underway.
TO RAISE THE T-TOP
1 The T-Top should always be raised and
lowered by 2 people.
3 Raise both the T-Top roof and support arms
in a slow, controlled movement.
CAUTION.
as T-Top nears upright position.
5 Release and remove the strap securing the
T-Top roof to the supporting arms.
18
Make WARNING.
must be in the folded
down position and
secured with straps when
being transported.
Gas strut force increases
The T-Top
struts to aid assembly.
Make sure that hands are
clear of mechanisms at all
times.
2 Ensure the cam levers are fully pulled
out and the locking pin is located inside
the supporting arm during both raising and
lowering movements.
4 Push the cam levers into the supporting
arms, rotate 90° to align with the recess and
then fold the lever in to fully lock.
6 Pivot the roof up to the horizontal position.
WARNING. The T-Top
has integrated gas