5.3.2. Menu Structure of the Safety Unit
Please find the relevant parameter list of the safety units in the respective
operation manual!
Doc. # R60718
The first menu level serves for selection of the
parameters to be edited (SMCB-Display or
Safety Unit).
To edit the safety unit, please select "Safety
Unit".
To edit already loaded parameters,
please select „Use Loaded Data" and
press OK to confirm.
See chapter 0
To load actual parameters from the
safety unit, please select „Load Data
From Safety Unit" and press OK to
confirm.
To load parameters for a safety unit
from the SMCB-Display flash
memory, please select „Load Data
From Display Memory" and press OK
to confirm.
Please select „Edit Data" and press
OK to confirm.
See chapter 0
To save the parameter-set in the
safety unit, please select „Save Data
To Safety Unit" and press OK to
confirm.
See chapter 0
Electrical Connections
.
EN - 13