Safety Instructions And Responsibility; General Safety Instructions - Kübler SMCB Instructions D'utilisation

Safety Instructions and Responsibility

1. Safety Instructions and Responsibility

1.1. General Safety Instructions

This operation manual is a significant component of the unit and includes
important rules and hints about the installation, function and usage. Non-
observance can result in damage and/or impairment of the functions to the
unit or the machine or even in injury to persons using the equipment!
Please read the following instructions carefully before operating the
device and observe all safety and warning instructions! Keep the manual
for later use.
A pertinent qualification of the respective staff is a fundamental
requirement in order to use these manual. The unit must be installed,
connected and put into operation by a qualified electrician.
Liability exclusion: The manufacturer is not liable for personal injury and/or
damage to property and for consequential damage, due to incorrect handling,
installation and operation. Further claims, due to errors in the operation
manual as well as misinterpretations are excluded from liability.
In addition the manufacturer reserve the right to modify the hardware,
software or operation manual at any time and without prior notice. Therefore,
there might be minor differences between the unit and the descriptions in
operation manual.
The raiser respectively positioner is exclusively responsible for the
safety of the system and equipment where the unit will be integrated.
During installation or maintenance all general and also all country- and
application-specific safety rules and standards must be observed.
If the device is used in processes, where a failure or faulty operation could
damage the system or injure persons, appropriate precautions to avoid such
consequences must be taken.
Doc. # R60718 EN - 1