5.3. „PROGRAMMING MODE"
The DIL-switch positions of the safety unit are:
In this mode the parameters of the programming unit SMCB-Display or the
parameters of the safety unit can be editing by the touch panel.
5.3.1. SMCB-Display Menu Structure
Please find the SMCB-Display Parameter List in the chapter 6
For orientation, the actual menu from the first menu-level appears in the top
left corner.
Doc. # R60718
The first menu level serves for
selection of the parameters to be
edited (SMCB-Display or Safety Unit).
To edit the SMCB-Display, please
select "Display Unit".
To edit parameters, please select
„Edit Data" press OK to confirm.
See chapter 0
To save the parameters of the
SMCB-Display, please select „Save
Data To Display Unit" and press OK
to confirm.
See chapter 0
Electrical Connections
EN - 12