Mounting On Safety Unit - Kübler SMCB Instructions D'utilisation

3. Mounting On Safety Unit

The mounting of the programming unit SMCB-Display can be done by simply
plugging the programming unit at the safety device. Via the 8-position pin
strip, both units will be connected. A mechanical polarity protection ensures
that the device cannot be plugged wrong. Neodymium magnets ensure a safe
connection.
Rear view
Doc. # R60718
Mounting On Safety Unit
Neodymium magnet:
Neodymium magnet for safety
mounting.
Polarity protection:
Mechanical polarity protection.
EN - 6