Eurosystems M250 EVO Mode D'emploi page 13

List of contents
Introduction
Conditions of use
Safety measures
Instructions for operating
Transport
Assembly
Regulating
Maintenance
Technichal Data
Noise
Serious risk for operator
and bystander safety.
Introduction
Dear client,
thank you for your confidence in purchasing our equipment. We hope you will spend many enjoyable
hours using it. The following working instructions are issued to ensure a reliable use of the machine from the
beginning. If will carefully follow our instructions the machine will correctly operate and have a long service life. The
machines are tested under the most severe conditions before being put into production and are subjected to strict
continuous tests during manufacturing. We can therefore be sure that you are purchasing a quality product.
The machine has been tested in the country of origin by indipendent testing authorities and in accordance
with strict worknorms and safety standards.
Only original manufacturer's components should be used to maintain guaranteed function and safety.
The operator will loose any guarantee right if the machine is fitted with non-original spare parts/
components.
Our machines are subject to design and contructions modifications without notice.
For any questions and/or spare parts orders, please inform us about the part and serial numbers.
IDENTIFICATION DATA (Fig. 1)
motormower, under the engine. Note: in case you need spare parts or/and technical after-sales service, please inform
us about the motormower serial number.
CONDITIONS AND LIMITATION OF USE
operations on grassy soil and has to be worked only using original equipment and spare parts. Any use other then
those described above is prohibited and will involve the guarantee cancellation and serious risks both for operator
and bystanders.
SAFETY PRECAUTIONS
read the operating instructions carefully. Persons not familiar with these instructions should not use
the machine.
1. Before you start mowing, the lawn must be cleared of foreign bodies and also during mowing care must be
taken of these foreign bodies.
2. When starting the motor, the person who is handling the machine must not stand in front of the cutter bar.
3. When the rotary mower is lifted to be transported, the motor has to be stopped and user has to wait until the
cutting tools come to a standstill. When pushing outside the lawn, the cutting tools are to be stopped.
4. Maintaining and cleaning works and the adjustment of the cutting height are only allowed when the
The label with machine data and serial number is on the left side of the
This motormower has been designed to perform mowing
Attention: Before assembly and putting into operation, please
9