Lenz Digital Plus LH101 Mode D'emploi page 15

Fast clock
1.2 Displaying the fast clock
In the lower line of the display, you can display the model time as an
alternative to the function status.
Set the desired minute ...
... and press the rotary knob.
Use the rotary knob to select the setting of
the time factor.
Press the rotary knob, ...
... set the desired time factor ...
... and confirm by pressing the rotary knob.
Press the 'M' key to save the settings in the
LZV200 command station.
At the end of the write operation, the LH101
returns to the "clock setting" menu.
Press 'Esc' to return to "setup system", ...
... another pressure brings you back to
locomotive control.
15
E